Room status at a glance
Temperature, setpoint and occupancy hints for every room, by floor and building.
Solution
Hotels and Campuses
KNX rooms, BACnet plant and Modbus meters across towers, wings and campuses. IoTServa summarises them by building, floor and room for the people who run them.
- KNX
- BACnet
- Modbus
- BLE
The Problem on Site
Hospitality and campus operators manage hundreds of rooms across several buildings, each with its own controllers. Knowing which rooms are occupied, which are overcooled and which plant serves them takes several tools.
Typical Equipment
- KNX room controllers and thermostats
- BACnet plant and fan coil controllers
- Energy and water meters
- BLE occupancy and asset tags
- Door and window contacts
What You Get to See
Energy tied to occupancy
Plant and room data together show where energy is spent on empty rooms.
Many buildings, one hierarchy
Sites, buildings, floors and rooms organise the data the way the estate is run.
Faster fault finding
Engineers see room and plant faults together before a guest or tenant complains.
Protocols in This Setup
Each one is read natively and joins the same tag model.
KNX
Listen to KNX group telegrams over KNX IP, map group addresses from your ETS project, and control rooms from one place.
Read MoreBACnet
Read chillers, air handlers and VAV boxes over BACnet/IP and BACnet MS/TP, with COV subscriptions so changes arrive when they happen.
Read MoreModbus
Poll Modbus RTU and Modbus TCP devices, decode registers with the right word order and scaling, and publish clean engineering values.
Read MoreBLE
Scan advertisements and read GATT services through BLE gateways, to track assets, rooms and short-range sensors.
Read MoreWhere We Suggest the Pilot Starts
Start with one floor of rooms and the plant that serves it. Import the ETS project first so KNX group addresses arrive named.
Questions for This Setup
Do we need the ETS project for KNX?
It is strongly recommended. The ETS export is what turns group addresses into named, typed points.
Can guests see any of this?
No. IoTServa is an operations tool. Guest-facing controls remain on the existing room systems.
Show Us the Hotels and Campuses Equipment. We Will Scope the Pilot.
Tell us which protocols are on site. We will scope a pilot that reads your real devices.